Also, you cannot run a show command while in config mode.
""D. J. Jones"" <[EMAIL PROTECTED]> wrote in message
92nv6k$tvt$[EMAIL PROTECTED]">news:92nv6k$tvt$[EMAIL PROTECTED]...
> You need to separate the default route from the mask. You should have a
> total of six (6) periods or dots. You have seven (7) use this instead:
>
> ip route 0.0.0.0 0.0.0.0 172.16.11.1
>
> ..dj
> <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > 2621(config)#ip route 0.0.0.0.0.0.0.0 172.16.11.1
> > % Incomplete command.<-----------------Got this?????
> > 2621(config)#
> > 2621#config t
> > Enter configuration commands, one per line. End with CNTL/Z.
> > 2621(config)#ip route 0.0.0.0.0.0.0.0 172.16.11.1<-----------I typed
this
> > EXACTLY as it said to do.
> > % Incomplete command.<-----------------Got this?????
> > 2621(config)#ip route 0.0.0.0.0.0.0.0 172.16.11.1
> > % Incomplete command.
> > 2621(config)#ip classless
> > 2621(config)#show ip route
> > ^
> >
> > % Invalid input detected at '^' marker.
> >
> >
> > --------------------------------
> > While doing Lab 5.3a Default Routes, page 40, on routerSim 2.X, I get
the
> > above error msg while trying to create a default route for the 2621
> router:
> >
> > Does anyone know what, if anything I am doing wrong or if there is a
> mistake
> > in the text?
> >
> > TIA,
> >
> > Jess
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
