If you do sh ver from enable mode you get :-
PIX_TH_BB# sh ver
PIX Version 4.4(4)
Compiled on Thu 06-Jan-00 16:07 by pixbuild
PIX BIOS (4.0) #0: Tue May 18 16:29:54 PDT 1999
PIX_TH_BB up 104 days 21 hours
Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz
Flash strata @ base 0x300
0: ethernet0: address is 0050.54ff.382e, irq 9
1: ethernet1: address is 0050.54ff.382f, irq 7
Licensed Options:
Failover: Enabled
IPSec: Disabled
Ports allowed: 6
Serial Number: 1234567890
------
Two things that say its a UnRestricted pix.
1) 64Meg of Ram - Restricted pix has only 32meg
2) the Failover option is enabled
If you have a Restricted and buy the upgrade you get 32meg of ram and a
software patch.
Hope this helps
Andrew
-----Original Message-----
From: Florin Mechetiuc [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 02, 2001 3:22 PM
To: [EMAIL PROTECTED]
Subject: PIX failover
I have couple of 520 firewalls ordered a while back but I don't know if is a
way to check
if they are in failover bundle.
To be more specific , I have one up and running but I would like to install
the failover and I don't which one is ( I have other three
ordered for other projects). I think it might be a way of checking on
Cisco's website by having the serial number of the main firewall and
then I can get the the serial number of the failover.
Thanks and Happy New Year !
Florin Mechetiuc
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
