Of course the REAL test is to unplug one of them once you are certain it is
configured properly to test
the failover and see first hand how it reacts by viewing the routes,
protocols and translations to verify
that all is working according to plan.
Then failover again just to return to the original and prove that it will
return after the initial failure has been resolved.
Put your results into your operating manual(s) for future reference.
-----Original Message-----
From: Andrew Twigger [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 02, 2001 9:55 AM
To: 'Florin Mechetiuc'; [EMAIL PROTECTED]
Subject: RE: PIX failover
If you do sh ver from enable mode you get :-
PIX_TH_BB# sh ver
PIX Version 4.4(4)
Compiled on Thu 06-Jan-00 16:07 by pixbuild
PIX BIOS (4.0) #0: Tue May 18 16:29:54 PDT 1999
PIX_TH_BB up 104 days 21 hours
Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz
Flash strata @ base 0x300
0: ethernet0: address is 0050.54ff.382e, irq 9
1: ethernet1: address is 0050.54ff.382f, irq 7
Licensed Options:
Failover: Enabled
IPSec: Disabled
Ports allowed: 6
Serial Number: 1234567890
------
Two things that say its a UnRestricted pix.
1) 64Meg of Ram - Restricted pix has only 32meg
2) the Failover option is enabled
If you have a Restricted and buy the upgrade you get 32meg of ram and a
software patch.
Hope this helps
Andrew
-----Original Message-----
From: Florin Mechetiuc [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 02, 2001 3:22 PM
To: [EMAIL PROTECTED]
Subject: PIX failover
I have couple of 520 firewalls ordered a while back but I don't know if is a
way to check
if they are in failover bundle.
To be more specific , I have one up and running but I would like to install
the failover and I don't which one is ( I have other three
ordered for other projects). I think it might be a way of checking on
Cisco's website by having the serial number of the main firewall and
then I can get the the serial number of the failover.
Thanks and Happy New Year !
Florin Mechetiuc
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
