I have a 2501 router. There is a password set on the user mode and I don't
have the password. I went to TAC website and followed the instructions for
recovering password but when I'm in Hyperterminal (version 6.1) on my NT
server 4.0 sp6 I can't boot into Memory monitoring mode. I get what is
below. And it just stops. Any help would be great. Thanks.
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 4096 Kbytes of main memory
F3: 5773940+168176+415888 at 0x3000060
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IO-L), Version 12.0(1), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 20-Oct-98 15:05 by phanguye
Image text-base: 0x03030258, data-base: 0x00001000
cisco 2500 (68030) processor (revision F) with 4096K/2048K bytes of memory.
Processor board ID 05198864, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read ONLY)
Press RETURN to get started!
00:00:20: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:20: %LINK-3-UPDOWN: Interface Serial0, changed state to down
00:00:20: %LINK-3-UPDOWN: Interface Serial1, changed state to down
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed
state to down
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed
state to down
00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
state to down
00:00:26: %LINK-5-CHANGED: Interface Loopback1, changed state to
administratively down
00:00:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0.16,
changed state to down
00:00:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0.100,
changed state to down
00:00:31: %LINK-5-CHANGED: Interface Serial1, changed state to
administratively down
00:00:33: %SYS-5-CONFIG_I: Configured from memory by console
00:00:33: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IO-L), Version 12.0(1), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 20-Oct-98 15:05 by phanguye
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
