Hyperterm is broke. I've lost count on which versions work and which ones
are broke. It doesn't pass the "break" sequence properly.
Do yourself a favor and download TeraTerm.
It works great on every Windows platform I've used so far.
Kevin Wigle
----- Original Message -----
From: "Troy" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Saturday, 06 January, 2001 18:53
Subject: 2501 Problems
> I have a 2501 router. There is a password set on the user mode and I
don't
> have the password. I went to TAC website and followed the instructions
for
> recovering password but when I'm in Hyperterminal (version 6.1) on my NT
> server 4.0 sp6 I can't boot into Memory monitoring mode. I get what is
> below. And it just stops. Any help would be great. Thanks.
>
>
>
> System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
> Copyright (c) 1986-1995 by cisco Systems
> 2500 processor with 4096 Kbytes of main memory
>
> F3: 5773940+168176+415888 at 0x3000060
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-IO-L), Version 12.0(1), RELEASE SOFTWARE
(fc1)
> Copyright (c) 1986-1998 by cisco Systems, Inc.
> Compiled Tue 20-Oct-98 15:05 by phanguye
> Image text-base: 0x03030258, data-base: 0x00001000
>
> cisco 2500 (68030) processor (revision F) with 4096K/2048K bytes of
memory.
> Processor board ID 05198864, with hardware revision 00000000
> Bridging software.
> X.25 software, Version 3.0.0.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read ONLY)
>
>
>
> Press RETURN to get started!
>
>
> 00:00:20: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
> 00:00:20: %LINK-3-UPDOWN: Interface Serial0, changed state to down
> 00:00:20: %LINK-3-UPDOWN: Interface Serial1, changed state to down
> 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0,
changed
> state to down
> 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed
> state to down
> 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
> state to down
> 00:00:26: %LINK-5-CHANGED: Interface Loopback1, changed state to
> administratively down
> 00:00:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0.16,
> changed state to down
> 00:00:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0.100,
> changed state to down
> 00:00:31: %LINK-5-CHANGED: Interface Serial1, changed state to
> administratively down
> 00:00:33: %SYS-5-CONFIG_I: Configured from memory by console
> 00:00:33: %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) 2500 Software (C2500-IO-L), Version 12.0(1), RELEASE SOFTWARE
(fc1)
> Copyright (c) 1986-1998 by cisco Systems, Inc.
> Compiled Tue 20-Oct-98 15:05 by phanguye
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
