Guys ,
thanks for all your help so far......
let me elaborate a bit more ......this is our setup
1 x 3640 router to outside world 2x serial (to diff sites) 1 x FE
goes to
1 x 2948-LG3 FE
Goes to
1 x 6509 Via Fibre
another 6509 is acting as HSRP backup.....
what is happening is that we are getting the bridge port message on the
switch......but we are also (on the MFSC and 3640) getting this EIGRP
message
%DUAL-5-NBRCHANGE :ip-eigrp (AS no) neighbor xx.xx.xx.xx is up :new
adjacency
then
%DUAL-5-NBRCHANGE :ip-eigrp (AS no) neighbor xx.xx.xx.xx is down : holding
time expired
30 secs later ......
have swapped cable ,switchport, FE card,IOS 12.0.15
still no good......
ANY HELP most apprecieated....
regards
john
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
