Which neighbor router is flapping up and down, I couldn't tell from your
message. Do you have any access lists configured, and have you verified
that all your hello and hold timers match on all the routers?
At 07:25 AM 1/16/01 +0000, you wrote:
>Guys ,
>thanks for all your help so far......
>
>let me elaborate a bit more ......this is our setup
>
>1 x 3640 router to outside world 2x serial (to diff sites) 1 x FE
>goes to
>1 x 2948-LG3 FE
>Goes to
>1 x 6509 Via Fibre
>another 6509 is acting as HSRP backup.....
>
>what is happening is that we are getting the bridge port message on the
>switch......but we are also (on the MFSC and 3640) getting this EIGRP
>message
>%DUAL-5-NBRCHANGE :ip-eigrp (AS no) neighbor xx.xx.xx.xx is up :new
>adjacency
>then
>%DUAL-5-NBRCHANGE :ip-eigrp (AS no) neighbor xx.xx.xx.xx is down : holding
>time expired
>30 secs later ......
>
>have swapped cable ,switchport, FE card,IOS 12.0.15
>still no good......
>
>ANY HELP most apprecieated....
>
>regards
>
>john
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
