I don't know where my brain is today, for some reason I was thinking that
the CLI was the command set associated with the low-end switches. You WILL
need a pretty extensive knowledge of CLI commands for fill-in-the-blanks, as
well as some router config commands. The IOS switch commands are the ones
that are covered less thoroughly. If you don't have access to a 5xxx
switch, like I didn't, do a lot of lookup on CCO about the commands, and
make yourself some flash cards with the commands, syntax and examples.
That's what I did anyway, and it paid off. I actually prefer
fill-in-the-blank questions to murky multiple-choice ones. Anyway, good
luck, and sorry for the screw-up.
~Seth~
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
