In IOS 11.2, a 'show dialer' shows the time until disconnect, as below...
Serial2/0:9 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is physical layer up
Interface bound to profile Dialer1
Time until disconnect 118 secs <-- idle timer value
Connected to xxxxxxxxxx (router1)
I find the idle-timer very useful when troubleshooting.
However I am playing with an AS5300 running IOS 12.1(4), and it doesn't give the value
of the idle-timer.
Serial0:30 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial reason: ip (s=x.x.x.x, d=x.x.x.x)
Interface bound to profile Di2
Current call connected 00:05:14
Connected to xxxxxxxxxx (router2)
I've checked the CCO command reference for 12.1, and it still shows the
'time until disconnect' line in the doco. I can't see any matching bugs on
Bug Search.
Has anyone come across this before? Bug, or 'feature'? Is it restricted
to the AS5300?
And... has anyone found this information in any other command??
Ta,
JMcL
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
