Erick,
Thanks for passing on the question.
sh is act doesn't help much either.
router1#sh is act
--------------------------------------------------------------------------------
ISDN ACTIVE CALLS
--------------------------------------------------------------------------------
Call Calling Called Remote Seconds Seconds Seconds Charges
Type Number Number Name Used Left Idle Units/Currency
--------------------------------------------------------------------------------
Out xxxxxxxxxx router2 1890 - - 0
--------------------------------------------------------------------------------
I'd be interested in getting feedback from others regarding what IOS
versions/platforms show the idle-timer in the 'show dialer' command, and
which don't.
Is anyone else running 12.1 with ISDN? What platform? What shows up with
'show dialer'?
JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 22/01/2001
09:14 am ---------------------------
"Erick B." <[EMAIL PROTECTED]>@groupstudy.com on 19/01/2001 05:04:31 pm
Please respond to "Erick B." <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
[EMAIL PROTECTED]
cc:
Subject: Re: ISDN idle-timer
Hi,
Have you tried 'show isdn act' ? I haven't done it on
a AS5300 but that shows a listing of active calls with
phone #, time up, idle time remaining, etc.
I also asked your question on the Cisco-NAS mailing
list which is more access-server related.
--- [EMAIL PROTECTED] wrote:
> In IOS 11.2, a 'show dialer' shows the time until
> disconnect, as below...
> Serial2/0:9 - dialer type = ISDN
> Idle timer (120 secs), Fast idle timer (20 secs)
> Wait for carrier (30 secs), Re-enable (15 secs)
> Dialer state is physical layer up
> Interface bound to profile Dialer1
> Time until disconnect 118 secs <-- idle
> timer value
> Connected to xxxxxxxxxx (router1)
>
> I find the idle-timer very useful when
> troubleshooting.
> However I am playing with an AS5300 running IOS
> 12.1(4), and it doesn't give the value of the
> idle-timer.
>
> Serial0:30 - dialer type = ISDN
> Idle timer (120 secs), Fast idle timer (20 secs)
> Wait for carrier (30 secs), Re-enable (15 secs)
> Dialer state is data link layer up
> Dial reason: ip (s=x.x.x.x, d=x.x.x.x)
> Interface bound to profile Di2
> Current call connected 00:05:14
> Connected to xxxxxxxxxx (router2)
>
> I've checked the CCO command reference for 12.1, and
> it still shows the
> 'time until disconnect' line in the doco. I can't
> see any matching bugs on
> Bug Search.
> Has anyone come across this before? Bug, or
> 'feature'? Is it restricted
> to the AS5300?
> And... has anyone found this information in any
> other command??
>
> Ta,
> JMcL
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
