Configure your devices to send SNMP traps to the management workstation
and you will get more than interface up/down. It depends on the settings for
snmp traps.
HTH
Cristian
-----Original Message-----
From: Larry Ogun-Banjo [mailto:[EMAIL PROTECTED]]
Sent: Monday, January 29, 2001 11:54 AM
To: [EMAIL PROTECTED]
Subject: HP openview reporting
I once worked in a NOC where the routers report the state of their
interfaces to
the monitoring system (HP Openview) ie when an interface goes down, an alarm
is
seen by the administrator. I am interested to find information/sample
configuration that could assist me in configuring my routers to do the same.
At
present, all I get is node up/down statements provided when HPOv polls the
router. Thanx
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
