Also setup the proper community names on the router and in HP Openview and
make sure they are consistent :)
"Piatnitchi Cristian" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Configure your devices to send SNMP traps to the management workstation
> and you will get more than interface up/down. It depends on the settings
for
>
> snmp traps.
>
> HTH
> Cristian
>
> -----Original Message-----
> From: Larry Ogun-Banjo [mailto:[EMAIL PROTECTED]]
> Sent: Monday, January 29, 2001 11:54 AM
> To: [EMAIL PROTECTED]
> Subject: HP openview reporting
>
>
> I once worked in a NOC where the routers report the state of their
> interfaces to
> the monitoring system (HP Openview) ie when an interface goes down, an
alarm
> is
> seen by the administrator. I am interested to find information/sample
> configuration that could assist me in configuring my routers to do the
same.
> At
> present, all I get is node up/down statements provided when HPOv polls the
> router. Thanx
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
