Hi Leigh Ann,
As you can see below I do NOT have the option of configuring a VTY Line!
C1912-EN(config)#line ?
console Primary terminal line
Pierre-Alex
Pierre-Alex
-----Original Message-----
From: Leigh Anne Chisholm [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 13, 2001 11:15 AM
To: Pierre-Alex; Dale Cunningham
Cc: [EMAIL PROTECTED]
Subject: RE: VTY LINES NON EXISTENT!!!!
You'll find you'll get that error message on that switch, as well as on any
router that doesn't have a VTY password specified. It's a security
precaution to prevent unauthorized users from telnetting to a device where
an administrator has accidentally forgotten to assign a password.
Connect via console port, and set a VTY password.
-- Leigh Anne
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Pierre-Alex
Sent: February 13, 2001 9:30 AM
To: Dale Cunningham
Cc: [EMAIL PROTECTED]
Subject: VTY LINES NON EXISTENT!!!!
Hi All,
I can't telnet into my 1912XL-EN Switch. I am using the latest IOS (9.00...)
I get the error message, "password required but none set".
There is no option on this switch that I could find for setting VTY lines
options. Am I doing something wrong?
Pierre-Alex
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
