On the frame-relay switch router, just make sure you specify "frame-relay
intf-type dce" command. On point to point serial connection between 2
routers, you will need to setup clock rate on one of the routers. Which ever
router you put the clock rate, it becomes the DCE.
""CiScO"" <[EMAIL PROTECTED]> wrote in message
96i57s$bpl$[EMAIL PROTECTED]">news:96i57s$bpl$[EMAIL PROTECTED]...
> Do I need to config the serial as a DCE or does it automatically become a
> DCE when I specify a clock rate?
>
> Will this type of connection work even if I'm not running Frame Relay, for
> instance setting up OSPF single area or multiple area, using ppp encap?
>
> Thanks!
>
>
> ""John Neiberger"" <[EMAIL PROTECTED]> wrote in message
> sa8c04a1.091@fsutil01">news:sa8c04a1.091@fsutil01...
> > Each serial link needs to have some sort of clocking at the physical
> > layer, regardless of your choice of datalink layer protocol. In
> > addition, each serial link is entirely separate from the others and can
> > have differing clockrates.
> >
> > Be sure that you set your clockrate on the DCE side only. The DTE side
> > does not need to be specified because it is, by definition, listening to
> > the clock from the DCE.
> >
> > >>> "." <[EMAIL PROTECTED]> 2/15/01 4:09:37 PM >>>
> > DCE to DTE no CSU/DSUs
> >
> > If I connect my routers via serial interfaces using a crossover serial
> > cable
> > , do I need to set a clock rate even if I'm running fame relay? If I do
> > need
> > to use a clock rate do all the routers need to be set for the same
> > clock
> > rate?
> >
> > Thanks!
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
