I have found that one of the more currnet versions of hyperterminal will not
work with the console of some of the cisco routers. I have not figured out
whether it is the IOS or just the hyperterminal. Try upgrading your
hyperterminal program or using another program. If that is not possible try
a another desktop or laptop with Windows NT or 98. I have windows 2000 and
have run into the same problem.
Cyndi Garrison
-----Original Message-----
From: Navin Parwal [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, March 06, 2001 7:23 AM
To: [EMAIL PROTECTED]
Subject: Cisco Configuration Help
Hello Everyone ,
I am new on Cisco routers and Switches , I am facing a problem on
a new Cisco router 2610 which my company has purchased .
I am able to telnet on to that router via other router , but I am not
able to configure with the console port , as soon as i start it with the
console port , it starts , displays the welcome message and then it shows
the status of the iinterfaces which has come up , but it does not come to
the user mode , ie cisco> prompt .
When I telnet it from the other router I am able to log in giving the
telnet password and I am able to configure it then but I am not able to get
the prompt from my console which is on Windows Millemium , could anyone
guide me why this error is coming and how I may correct it .
thanks in advance,
Navin Parwal
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
