The error message doesn't mean anything to me.
Items that come to mind:
1. There is a command "test flash" in IOS - May help
2. Are you running a compressed IOS image, if so, you may need more RAM
Good luck
""CiScO"" <[EMAIL PROTECTED]> wrote in message
981hmn$jne$[EMAIL PROTECTED]">news:981hmn$jne$[EMAIL PROTECTED]...
> I have 6MB Flash pcmica card that I'm using on a Cisco 1005 that looks to
be
> defective but I'm not ready to give up just yet. The router will not
> initialize the card will get stuck in a loop doing so. One of the messages
> it gives is...
>
> device cannot be loaded, no magic number found
>
> I've erased the IOS image and copied a known IOS image repeatedly and it
> still would not load the IOS. There is a format command supported in the
RSP
> routers but the Cisco 1005 don't seem to support the format command. Any
> suggestions?
>
> Thanks!
>
> Joe N. CCNA
> http://www.tmjf.com
> [EMAIL PROTECTED]
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
