Hi Sam
did you do set your security-levels correctly ? the outside interface has to
have the lowest security level and it would only be possible to build a
connection initiated from a higher to a lower security level.
dave
-----Urspr�ngliche Nachricht-----
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Im Auftrag von
Sam
Gesendet: Montag, 19. M�rz 2001 19:28
An: [EMAIL PROTECTED]
Betreff: PIX problem
Hello Group,
I am having trouble figuring out a small issue with a PIX firewall. It is
running ver 4.4(5).
After entering the approriate static and conduit (WWW) commands, I tried
accessing the host from our internal network using the external address and
I was not able to. I then tested from a machine that is outside our
firewall and was able to access the host without any problem.
Is their a command that I am missing in order to let users on our internal
network access hosts using the external IP addresses?
Thanks in advance,
Sam
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
