Is this list turning confrontational to those who use it. It seems your
remark "its not one that someone
would ask in your position" to this post is out of line. You don't know
anything about this persons position or experience.
Additionally isn't this an open list where all can contribute and
participate?
DaL
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
The.Rock
Sent: Monday, March 19, 2001 12:03 PM
To: [EMAIL PROTECTED]
Subject: Re: 2500 wont save config
It might not save due to lack of mem. Make sure you have enough room to hold
both the current IOS as well as the one your trying to upgrade. Otherwise
you will need to delete one of them first. Being that your on IOS 10.3 tells
me that probably you don't have enough memory.
And I see your title....." LAN Engineer". I'm not picking on you, but it
just seems that for the question you just asked, its not one that someone
would ask in your position. This goes back to the paper cert thing!!!!
""Plantier, William (Spencer)"" <[EMAIL PROTECTED]> wrote in
message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have a 2500 router with 10.3 IOS and I cant save the config. Any
> suggestions?
>
> Wm. Spencer Plantier
> LAN Engineer
> (919) 474-1300 ext 0873 Office
> (919) 474-1056 Fax
> (919)696-8848 Cell
> [EMAIL PROTECTED]
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
