May be you try windows 95/98.
Or using other pc, if it worked as the previous owner said.
""Shawn P Bolan"" <[EMAIL PROTECTED]> ���g��l��
99b6gr$nrk$[EMAIL PROTECTED]">news:99b6gr$nrk$[EMAIL PROTECTED]...
> Tried different speeds as well w/no luck. Verified from the previous
owner
> that this was working at 9600 8N1 before he shipped.
>
> Thanks for the reply.
>
> ""John Neiberger"" <[EMAIL PROTECTED]> wrote in message
> sab8a9e1.049@fsutil01">news:sab8a9e1.049@fsutil01...
> > Try changing the baud rate on your PC/laptop. The default is 9600, but
> > the console port can be changed to use 4800, 2400, and 1200 by making
> > modifications to the configuration register. If you can get it to work,
> > start out by doing password recovery by changing the register to 0x2142
> > and rebooting. This will set it to ignore NVRAM and also reset the
> > console speed back to 9600. When you've finished the password recovery
> > procedure, make sure to set the register back to 0x2102.
> >
> > HTH,
> > John
> >
> > >>> "Shawn P Bolan" <[EMAIL PROTECTED]> 3/21/01 12:51:05 PM >>>
> > I received a 2523 via a private purchase and am having problems making
> > a
> > console connection. The settings call for 8-N-2 (no flow control),
> > which I
> > am using. I am using HyperTerminal with a connector/cable that works
> > with
> > my other routers, but not this one. The power light is green, but no
> > other
> > indicators.
> >
> > Any ideas? Thank you.
> >
> >
> > --
> > Shawn P Bolan, MCSE/MCT, CCNA
> > [EMAIL PROTECTED]
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
