Have you checked the router's console speeds. There are half a dozen =
reasons for this, but none come to me right now :-) Anywho- try the =
connections @ 1200, 2400, etc. Remember- every time you change the =
Hyper Term speed you must restart the emulator (close the application & =
open it again).
This would be my recommendation not knowing what conditions the routers =
have just left & having done all the trouble shooting you have.
Let us know how you make out !!!
Phil =20
"Shawn P Bolan" <[EMAIL PROTECTED]> wrote in message =
99b4ql$iil$[EMAIL PROTECTED]">news:99b4ql$iil$[EMAIL PROTECTED]...
> I received a 2523 via a private purchase and am having problems making =
a
> console connection. The settings call for 8-N-2 (no flow control), =
which I
> am using. I am using HyperTerminal with a connector/cable that works =
with
> my other routers, but not this one. The power light is green, but no =
other
> indicators.
>=20
> Any ideas? Thank you.
>=20
>=20
> --
> Shawn P Bolan, MCSE/MCT, CCNA
> [EMAIL PROTECTED]
>=20
>=20
> _________________________________
> FAQ, list archives, and subscription info: =
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
