http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/1rb
ook/1rintrfc.htm#xtocid16677146
Scroll down to the Show Interface screen shot. It on the 3rd line & to the
right, next to rely 255/255 (as in reliability). What you see on this Sho
Interface is 1/255 (1 of a possible 255 on the load measurement & a
reliability of 100% (255/255). That's it- anything more precise requires
aftermarket bandwidth monitors.
I may be corrected, but that's my answer & I'm stick'n to it.
Phil
----- Original Message -----
From: "jbullock" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 22, 2001 5:41 PM
Subject: RE: interface utilization ??
> hey listers!
>
> anyone know a quick and dirty way to parse some info from the sho
interface
> command, like interface utilization, etc ? I tried that cisco tool, but
it
> only tells you what is possibly wrong not the interface utilization.
>
> thanks,
> jason
>
> this is from a 2924 catalyst switch.
>
> FastEthernet0/9 is up, line protocol is up
> Hardware is Fast Ethernet, address is 00d0.baaa.bc0a (bia
00d0.baaa.bc0a)
> Description: BIG IP
> MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
> Encapsulation ARPA, loopback not set, keepalive not set
> Half-duplex, 100Mb/s, 100BaseTX/FX
> ARP type: ARPA, ARP Timeout 04:00:00
> Last input never, output 00:00:00, output hang never
> Last clearing of "show interface" counters 03:12:31
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 0/75, 0 drops
> 5 minute input rate 298000 bits/sec, 87 packets/sec
> 5 minute output rate 218000 bits/sec, 79 packets/sec
> 2789509 packets input, 1003512202 bytes, 0 no buffer
> Received 1319 broadcasts, 0 runts, 0 giants, 0 throttles
> 4 input errors, 4 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 0 watchdog, 0 multicast
> 0 input packets with dribble condition detected
> 2693936 packets output, 753564104 bytes, 0 underruns
> 0 output errors, 33701 collisions, 0 interface resets
> 0 babbles, 0 late collision, 25705 deferred
> 0 lost carrier, 0 no carrier
> 0 output buffer failures, 0 output buffers swapped out
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
