check the jumpers... When I set mine up to operate as DCE, I had not changed
the jumpers, so they were still set to DTE. I plugged in the DCE side of the
cable, and did a show controller and it listed them all as DCE. Show
controller will only tell you what side of the cable is attached... You
should physically inspect the jumpers to be 100 percent sure. I am not
saying that this is definitely the issue, just that issuing the show
controller is not 100 percent verification of the state of the jumpers.
Z
>From: "ciscojolof" <[EMAIL PROTECTED]>
>Reply-To: "ciscojolof" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: AGS+(DTE) to 2523(DCE) back-to-back
>Date: Mon, 26 Mar 2001 10:56:52 -0600
>
>A show controller mci on the AGS+ shows that all serial ports are in DTE
>mode.
>In debug serial interface mode mineseen=0, yourseen=0 and I get a lot of
>carrier transitions in sh int s0.
>
>"Daniel Cotts" <[EMAIL PROTECTED]> wrote in message
>303479FA060CD211B8930000F805A88AA110EF@EXCHANGE1">news:303479FA060CD211B8930000F805A88AA110EF@EXCHANGE1...
> > As a first shot I'd verify those jumpers.
> >
> > > -----Original Message-----
> > > From: ciscojolof [mailto:[EMAIL PROTECTED]]
> > > Sent: Monday, March 26, 2001 9:57 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: AGS+(DTE) to 2523(DCE) back-to-back
> > >
> > >
> > > Hi,
> > >
> > > For 3months I have been trynig to have my AGS+(DTE) talk to
> > > my 2523(DCE).
> > > I am at my fourth back-to-back cable.
> > > The 2523 is sending keepalives but the AGS+ is not.
> > > AGS+ is DTE BY DEFAULT, so I didn't tinker with its jumpers.
> > > Have someone ever made an AGS+(DTE) talk to a 25xx(DCE)?
> > >
> > > Please help me.
> > >
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct
> > > and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
>_________________________________
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
