When working with my older 1900 switches, I sent an email to [EMAIL PROTECTED]
with the model, serial number and current firmware. They responded within
24 hours with upgrade information - there was actually none for my switch.
My guess is there will not be one for yours either. Many of the older
switches did not have command line access capability.
David Toalson
816-701-4142
> ----------
> From: Niraj Palikhey[SMTP:[EMAIL PROTECTED]]
> Reply To: Niraj Palikhey
> Sent: Thursday, April 05, 2001 10:38 PM
> To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: FW: 1912 switch with a DB-9 port for console??
>
> Hi Nick,
> Thank you very much for the information. I downloaded the ios for firmare
> 5.35 and uploaded it to the switch. When it reboots, I still don't see an
> option for the command line, K that I see in the other 1912. Does this
> older
> model of the 1912 even have such an option?
> Please advise.
> Thank you.
> Kind regards,
> [EMAIL PROTECTED]
>
>
> >From: Niraj Palikhey <[EMAIL PROTECTED]>
> >To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
> >Subject: FW: 1912 switch with a DB-9 port for console??
> >Date: Wed, 4 Apr 2001 23:48:26 -0400
> >
> >
> >
> > > -----Original Message-----
> > > From: Nick Brooks [SMTP:[EMAIL PROTECTED]]
> > > Sent: Wednesday, April 04, 2001 5:08 AM
> > > To: Niraj Palikhey
> > > Subject: Re: 1912 switch with a DB-9 port for console??
> > >
> > > The versions for the older 1912's is on CCO.
> > >
> > > http://www.cisco.com/cgi-bin/tablebuild.pl/cat1900
> > >
> > > Niraj Palikhey wrote:
> > >
> > > > Thank you for the info. That really helps. So now I know why it was
> >not
> > > > working. I have firmware V.5.35 on the switch and I was trying to
> >upload
> > > the
> > > > (I think) latest ios that worked on the newer 1912's. So I guess the
> > > right
> > > > ver. to use for this older switch must be on CCO, right?
> > > > Kind regards,
> > > >
> > > > >From: Nick Brooks Reply-To: Nick Brooks To: [EMAIL PROTECTED]
> > > Subject:
> > > > >Re: 1912 switch with a DB-9 port for console?? Date: Tue, 03 Apr
> 2001
> > > > >21:15:00 -0600
> > > > >
> > > > >make sure you have the right version for the "original" 1912. if
> you
> > > try
> > > > >and load the latest standard or enterprise, they won't work.
> looking
> >on
> > > > >cco, the highest version available is 5.3.7
> > > > >
> > > > >
> > > > >Niraj Palikhey wrote:
> > > > >
> > > > > > Allright, I finally got into the switch and reset it to factory
> > > > >defaults. > But I do not see an option for K-command line. I tried
> to
> > > > >upload the > enterprise ver. of the ios via the console using
> xmodem
> > > but
> > > > >immediately I > get a msg. saying cancelled by remote host. I have
> > > tried it
> > > > >5 times with no > luck. I did not have any problem when I upgrading
>
> >the
> > > > >newer 1912 switch > using xmodem via the console. Any ideas? >
> Thank
> > > you. >
> > > > >Kind regards, > [EMAIL PROTECTED] > > In the meanwhile,
> I'll
> > > keep
> > > > >trying too :-) > > >From: "Circusnuts" > >Reply-To: "Circusnuts" >
> > >To:
> > > >
> > > > > >CC: > >Subject: Re: 1912 switch with a DB-9 port for console?? >
> > > >Date:
> > > > >Tue, 3 Apr 2001 14:42:45 -0100 > > > >You have connected this to
> your
> > > Com1
> > > > >& the switch's Console port ??? Have > >you tried to change the
> >speeds
> > > on
> > > > >your Hyper Term (1200, 2400, etc.). > >Remember with Hyper Term,
> you
> > > must
> > > > >close the window & re-open, for it to > >take the speed change. If
> >your
> > > > >cable or speed are wrong, you should see > >garble @ the top left
> >hand
> > > side
> > > > >of the screen (when connected). I had an > >old 1924 about a year
> ago
> >&
> > > it
> > > > >took be weeks to figure out it took a > >different cable & I was
> not
> > > able
> > > > >to find anything on the CCO about it > >either. > > > >Let me know
> if
> > > any
> > > > >of this helps > >Phil > > > > > >----- Original Message ----- >
> > >From:
> > > > >"Niraj Palikhey" > >To: > >Cc: > >Sent: Tuesday, April 03, 2001
> 4:17
> >PM
> > > >
> > > > > >Subject: Re: 1912 switch with a DB-9 port for console?? > > > > >
> >
> > >
> > > > >
> > > > > > OK, I plugged in a null modem cable and now what? I hate to ask
> > > anyone >
> > > > > > > solutions to my problems the easy way out but I apologize for
> > > this. >
> > > > > >Would > >I > > > be able to get the info. on CCO? I was not sure
> >how
> > > the
> > > > >null modem cable > > > could get me into the switch using
> Hyperterm.
> >It
> > > > >does not. I have used a > > > null modem to get into a 3com switch
> >with
> > > > >3c0m's web-based software. So > >I > >am > > > thinking that Cisco
> > > would
> > > > >also have a similiar kind of software on CCO? > > > Please advise.
> >
> > >
> > > >
> > > > >Kind regards, > > > [EMAIL PROTECTED] > > > > > > > > >
> > >From:
> > > > >"Circusnuts" > > > >Reply-To: "Circusnuts" > > > >To: "Niraj
> >Palikhey"
> > > , >
> > > > > > > >CC: > > > >Subject: Re: 1912 switch with a DB-9 port for
> > > console?? >
> > > > > > > >Date: Mon, 2 Apr 2001 21:27:52 -0100 > > > > > > > >You'll
> need
> >a
> > > > >null modem cable to get into it from the console. It's > >an > > >
> > >old
> > > > >
> > > > > > >firmware version switch. > > > > > > > >Phil > > > > > > >
> >-----
> > > > >Original Message ----- > > > >From: "Niraj Palikhey" > > > >To: > >
> >
> > > >Cc:
> > > > > > > > >Sent: Monday, April 02, 2001 10:25 PM > > > >Subject: 1912
> > > switch
> > > > >with a DB-9 port for console?? > > > > > > > > > > > > > Hi, > > >
> >
> > >
> > > I
> > > > >just bought a 1912 switch(looks like an older model) that has a >
> > >db-9
> > > > >
> > > > > > >port > > > > > for the console connection. Do I just use a
> >regular
> > > > >console cable > >and > >a > > > >db-9 > > > > > adapter to console
> >in?
> > > How
> > > > >about the pinouts on the adapter itself? > >Does > > > >it > > > >
> >
> > > follow
> > > > >the same pin configuration that is used for the router? > >Please >
> >
> > >
> > > > >
> > > > >advise. > > > > > Thank you. > > > > > Kind regards, > > > > >
> > > > >[EMAIL PROTECTED] > > > > >
> > > > >_________________________________________________________________ >
> >
> > >
> > > > >
> > > > >Get your FREE download of MSN Explorer at http://explorer.msn.com >
> >
> > >
> > > > >_________________________________________________________________ >
> >
> > >
> > > Get
> > > > >your FREE download of MSN Explorer at http://explorer.msn.com >
> > > > >_________________________________________________________________ >
>
> >Get
> > > > >your FREE download of MSN Explorer at http://explorer.msn.com
> > > > >_________________________________ FAQ, list archives, and
> >subscription
> > > > >info: http://www.groupstudy.com/list/cisco.html Report misconduct
> and
> > > > >Nondisclosure violations to [EMAIL PROTECTED]
> > > > _________________________________________________________________
> > > > Get your FREE download of MSN Explorer at http://explorer.msn.com
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
