The linksys lets you do port redirection.
So you can point port 80 at one server.
Point port 21 to another server and port 23 to yet another.
I haven't experimented with what happens if you point the same port to two
different internal Ip addresses........ probably your best would be to
change the ports so each device has a different port.
Then you would telnet to w.x.y.z:port
Or, telnet to one inside device and then use it to telnet to others.
I have 2 linksys boxes, one for Cable and one for ADSL.
Kevin Wigle
----- Original Message -----
From: "Fred Danson"
To:
Sent: Saturday, 14 April, 2001 16:24
Subject: NAT capabilities of small Netgear/Linksys router [7:657]
> Hey Group,
>
> I am considering buying a small Netgear/Linksys router so I can link my
> computer, terminal server, and power supply to the internet through my
cable
> modem using NAT (actually it would be considered NAT overload or PAT, but
> Netgear and Linksys call it NAT). All of the Netgear/Linksys
advertisements
> that I have seen are very vague about their NAT capabilities.
>
> My goal is to have the ability to telnet to any of my inside devices from
an
> outside location. To do this, I would need to setup static PAT tables,
> right? Does anyone know if any of these small routers support this?
>
> Thanks in advance,
> Fred
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=664&t=657
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
