hello all:
here is a question. I have a setup as this
R1-----ether--------R2
R1=cisco 2501
R2=BAy ARN
now i have batled a for a bit with this scenario..routing rip between the
is easy but; OSPF my gooness.
I do not want to go into writting the configs but r1 and r2 all
interfaces in area 0.I have not been able to stablish adjencencies
between the two.
now this is what i have found out so share something outside of the below
if you are willing to coment.
area number in bay routers are in dotted notation only cisco can do both
dotted and decimal.so i am using area 0 for both routers 0.0.0.0...common
denominator i am using dotted notation
i found out that the MTU size for ospf for BAy is 1576 and cisco 1500 and
they must both match in order to form adjencencies between both.
I have set the mtu size on bay 1500.
still no adjencencies but they can ping each other......What am I missing
??????
Any magic that need that i am not aware of ...
debug ip ospf adjencencie
debug ip ospf packet
debug ip ospf events
show nothing the router is quiet
any help apreciated..
El pingu
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1036&t=1036
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
