Take a look at your subnet mask.
tm
I hear and I forget
I see and I believe
I do and I understand
-Confucius
Tim Medley - CCNA, CCDA
VoIP Engineer
704-943-3615 - Phone
704-525-9119 - Fax
877-6-iReady - Helpdesk
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Saturday, April 28, 2001 8:48 PM
To: [EMAIL PROTECTED]
Subject: 500-CS...HELP!! [7:2414]
Ok GUYS n GALS,
I got a simple dilemma, but I can't seem to get the solution. I know its
staring me in the face! :) I bought a 500-CS off ebay and I config with
TRANS IN ALL, but it doesn't take so I use TRANS IN TELNET and TRANS OUT
TELNET on the console of my test router and on the async line I have the
cable plugged to and use IP ADD 1.1.1.1 255.255.255.255 as a loopback int.
When I try a Reverse Telnet, it opens, but I get a blank screen and NO
CURSOR
for my router? WHAT GIVES?
Thanks,
Rob H.
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2483&t=2414
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
