Question #1 - you can use the summary address command in the case study if
you wish.
Question #2 - That's a good troubleshooting exercise for you. do a "debug
ip eigrp transactions" on Snider and Robinson to find out why the subnet
isn't being advertised in the routing table (hint: make sure your summary
address didn't include that subnet)
-e-
----- Original Message -----
From: "Jerry Seven"
To:
Sent: Saturday, May 05, 2001 6:37 PM
Subject: EIGRP: questions on "ip summary-address" command [7:3335]
> Hi group,
>
> I'm get confused to this command, according to explaination in Routing
TC/IP
> p724, the eigrp xx is where the summary address sent to, so in p380, the
> example on redistribute eigrp route to igrp domain, why the command can
also
> be used, for we want to send the summary route to igrp but not eigrp
> process.
>
> Another question is in p726, the second paragraph from bottom says that ip
> summary-address only filter external routes, I reproduced this case study
in
> my home lab, but on Snider I don't see 192.168.4.0, my IOS version are
all
> 12.0.
>
> Any ideas?
>
> Thanks,
>
> Jerry
>
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3381&t=3335
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
