I'd be grateful if someone could help me solve this problem:
I have a PIX 520 in a customer network with the following show version
command results:
pix# sh versh har
PIX Version 4.4(4)
Compiled on Thu 06-Jan-00 16:07 by pixbuild
pix up 2 days 3 hours
Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz
Flash strata @ base 0x300
0: ethernet0: address is 00d0.b785.4f86, irq 11
1: ethernet1: address is 00d0.b783.e78a, irq 10
Licensed Connections: 128
Serial Number: 18029118
Please I'd like to know if in the case of a PIX software upgrade from a
4.4(4) to a 5.2(1) version, I will need a activation Key.
Note: As you can see with the show version command, actually the device does
not have a activation key.
Thank in advance,
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5976&t=5976
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
