RE: RE:ATM int are up, unable to ping. [7:5934]

[Deloso, Elmer G (WPNSTA Yorktown)]

Thanks all.
I did notice the "RX warning" LED's on both routers being constantly on, and
as soon as i keyed in "atm clocking internal" on one router, both LED's went
away.
I'm sure that "Hutnik et. all" just copied the config from a scenario that
involved an ATM switch in the picture.
I wasn't aware of the fact that you can't ping the local 
ATM or FR interface. I'll be searching CCO to find out the rational behind
this.

Elmer Deloso

-----Original Message-----
From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
Sent: Friday, May 25, 2001 5:31 PM
To: [EMAIL PROTECTED]
Subject: Re: RE:ATM int are up, unable to ping. [7:5934]


ok, couldn't let this pass on a Friday afternoon.

Went to the lab and set up 2 routers as beginning on page 283, Lab #17.

No, it didn't work. I was using a 3600 and a 4700.

I dropped the 3600 and used another 4700. Didn't work.

However I noticed that when back-to-back both 4700's Rcv Alarm was flashing
crazy as well as another led which I forget the name.

I remembered a previous post about clock and gave the command "atm clock
internal" on one router.

Boom, lights are more sane and yes I can ping, from both routers to the
other router.

So, the lab is correct BUT they forgot the little thing about the clock if
you're directly back-to-back.  Plugged them both back into the LS-1010, took
the clock off and things are back to normal.

Nice little diversion.

Kevin Wigle

----- Original Message -----
From: Deloso, Elmer G (WPNSTA Yorktown) 
To: 
Sent: Friday, May 25, 2001 1:47 PM
Subject: RE:ATM int are up, unable to ping. [7:5934]


> Based on 3 people that have so far concurred on using subinterfaces before
> you can ping, it seems that Hutnik's first Lab exercise in the ATM chapter
> is technically wrong. If I can prove this I will certainly send him an
> e-mail to clear up the issue.
> I'll try this tonight and post the working config.
> Thanks for your replies.
> Elmer
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6407&t=5934
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]