On 12.0 see the following. The configuration command is clock rate (speed)
2523(config-if)#clockrate ?
% Unrecognized command
2523(config-if)#clock?
clock
2523(config-if)#clock ?
rate Configure serial interface clock speed
2523(config-if)#clock rate ?
Speed (bits per second)
300
1200
2400
4800
9600
14400
19200
28800
32000
38400
56000
57600
64000
72000
115200
Choose clockrate from list above
A show run command gives the following:
interface Serial2
ip address 192.168.1.49 255.255.255.240
no ip directed-broadcast
clockrate 64000
Note that clockrate is all one word here.
> -----Original Message-----
> From: Adekola, Dennis D [mailto:[EMAIL PROTECTED]]
> Sent: Monday, June 04, 2001 10:36 AM
> To: [EMAIL PROTECTED]
> Subject: serial interfaces [7:7089]
>
>
> Hi guys
> Can anyone tel me if the config for the DCE is clockrate or
> clock rate
>
> Thanks
>
> Tade
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7095&t=7089
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
