Surprisingly enough, It Depends.
CCO claims the command is "clock rate". The online command help claims it
is "clock rate". However the command appears in "sh run" as "clockrate"
(at least on a 4700 and 7500 using IOS 11.2 - it may vary by platform and
IOS for all I know).
I think either variation will be accepted when configuring - I don't have a
convenient box to test it on at the moment.
JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 05/06/2001
08:30 am ---------------------------
"IP Admin" @groupstudy.com on 05/06/2001 01:49:35
am
Please respond to "IP Admin"
Sent by: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc:
Subject: RE: serial interfaces [7:7089]
It is clockrate.
Thanks
Mohammad khalid
-----Original Message-----
From: Adekola, Dennis D [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 04, 2001 11:36 AM
To: [EMAIL PROTECTED]
Subject: serial interfaces [7:7089]
Hi guys
Can anyone tel me if the config for the DCE is clockrate or clock rate
Thanks
Tade
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7170&t=7089
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
