Frame-relay has the ability to determine the DLCI #
automatically, but don't trust it. Complete the path,
why ..... as you can see by your testing ... it
worked !!! :-)
--- Khurrum Shahzad wrote:
> When connecting cisco router ( as frame-relay
> switch) with frame relay
> device, I configured frame relay route as
>
> Serial 0 Dlci in 16 to Serial 1 Dlci out 26
> Serial 1 Dlci in 27 to Serial 0 Dlci out 17
> ( require only these 2 routes)
>
> But "show frame-relay pvc" shows both route status
> inactive and both route
> does not work.
>
> When I give additional two route ( not required )
>
> Serial 1 Dlci in 26 to Serial 1 Dlci out 16
> Serial 0 Dlci in 17 to Serial 0 Dlci out 27
>
> then both route status become active and
> configuration works.
>
> Is it necessary that dlci path must be
> completed?Because sometime it is not
> required to complete path of dlci.
>
> Can anybody give me guidence on this topic ?
>
>
>
>
> --
>
> _______________________________________________
> Get your free email from http://mymail.iname.com
[EMAIL PROTECTED]
=====
Chris from Chicago
MasterCNE, 5.x CNE, ICNE, 4.x CNE, CCNA, MCP
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8265&t=8217
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
