you can do that on only a simplex circuit
regards,
suaveguru
--- Jim Dixon wrote:
> I am curious how you would troubleshoot this circuit
> without the LMI being on it?
>
> Are you saying that you can transmit data without
> LMI over Frame?
> OK... How do you accomplish this?
>
> -----Original Message-----
> From: Khurrum Shahzad [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, June 13, 2001 2:23 PM
>
> The device with which I am connecting cisco has lmi
> disabled.
>
> >I am a little curiius why you'd want to do no
> >keepalive and disable lmi
> >on a frame ckt, I mean lmi is how the circuit does
> a >sanity check to check
> status.
>
> Brian "Sonic" Whalen
>
> On Wed, 13 Jun 2001, Khurrum Shahzad wrote:
>
> > I already configured frame relay ietf
> encapsulation and lmi disable ( no
> keep alives).
> > In my configuration frame relay cloud get data
> from s1 with dlci 26 and
> gives data on s1 with dlci 27. But in order to this
> configuration words i
> have to configure 2 additional route ( 26 on s1 and
> 17 on s0 which is not
> required for my configuraion). In absence of these
> route configuratio
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11895&t=8217
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
