Here is my case:
********************************
2 Catalyst 2924XL : A router(e0/1: 10.5.30.254) connected to Fa0/2 of Cat_1.
Cat_1's port 23 & 24 configured FEC are connected to CAT_2's port 23 & 24.
********************************
CAT_1 configuration (simplified)
!
interface FastEthernet 0/22
!
interface FastEthernet 0/23
port group 1
!
interface FastEthernet 0/24
port group 1
!
interface VLAN1
ip address 10.5.30.253 255.255.255.0
ip default-gateway 10.5.30.254
!
********************************
CAT_2 Configuration (simplified)
!
interface FastEthernet 0/22
!
interface FastEthernet 0/23
port group 1
!
interface FastEthernet 0/24
port group 1
!
interface VLAN1
ip address 10.5.30.252 255.255.255.0
ip default-gateway 10.5.30.254
!
********************************
Hope the above info is enough.
Problem:
I am able to telnet both Catalysts from a PC in 10.5.31.0/24 network,
but I can't telnet/ping from CAT_1 command line interface to CAT_2 VLAN1 ip
or e versa.
Is the problem caused by FEC between them? Any suggestion.
Thanks in advance
Lawrence
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8374&t=8374
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
