I have 2 routers {2502 & 2504}. Both TR are connected to ANDREW MAU 8228.
I am unable to bring up the interface. I tried setting ring speed to 4 & 16
but unsuccessful. I am using black box LT 056A Media Filters.
I did check the archives. Mr. Vincent Chong faced similar problem on 29th
March 2001 but there was no solution posted at the archive. This is what I
found - Problem fixed. Just follow Cisco recommendation and it works.
Would appreciate, if he can share whatever info he was referring too. Msg
being copied to VINCENT CHONG for help.
What is meant by wrong idb state? I see this in debug event output
Following is the interface & debug events output.
2504#show ip int brief
Interface IP-Address OK? Method Status
Protocol
BRI0 unassigned YES NVRAM administratively down
down
BRI0:1 unassigned YES unset administratively down
down
BRI0:2 unassigned YES unset administratively down
down
Serial0 192.1.1.2 YES NVRAM down
down
Serial1 193.1.1.2 YES NVRAM down
down
TokenRing0 unassigned YES NVRAM initializing
down
00:43:02: TR0 starting.
00:43:23: TR0 receive SRB_FREE, state=2, if_state=6
00:43:24: %TR-3-OPENFAIL: Unit 0, open failed: Phys. Insertion, ring
beaconing
00:43:24: %TR-3-BADSTART: Unit 0, Start completion and wrong idb state -
state= 0
00:43:25: TR0: reset from 308F4F6
00:43:25: TR0: txtmr: 0x0, msclk: 0x27C15C, qt: 0x0 (2605400ms)
Following is the condensed startup config output.
R2504#show config
Using 918 out of 32762 bytes
!
version 12.2
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname R2504
interface TokenRing0
no ip address
ring-speed 4
TX / RamG
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8554&t=8554
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
