On 0, Circusnuts wrote:
> I remember there being some differences between the 12.0 Enterprise 2900 &
> the 11.x's (I know the password break is different), but I think the
command
> is still the same #Port Monitor
>
> The IOS term is used on the "IOS" based switches (1900/2900/3500) & the OS
> term is used on the "Set" based switches (2901/2980/5000/5500/6500/8500).
>
I have "set" and "port" from the in the "enable" and "conf t" modes. It looks
like these commands don't exist in these modes.
The PDF pages at Cisco are confusing too.
--
Subba Rao
[EMAIL PROTECTED]
http://members.home.net/subba9/
GPG public key ID 27FC9217
Key fingerprint = 2B4C 498E 1860 5A2B 6570 5852 7527 882A 27FC 9217
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10112&t=10107
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
