Conf t
int fa #/#
port monitor
show port monitor
>From: "Circusnuts"
>Reply-To: "Circusnuts"
>To: [EMAIL PROTECTED]
>Subject: Re: Spanning on 2900XL switch [7:10107]
>Date: Wed, 27 Jun 2001 13:11:36 -0400
>
>Sorry- Conf t, then Interface Fa..., & then the Span Port command.
>
>Phil
>
>----- Original Message -----
>From: "Subba Rao"
>To: "Circusnuts"
>Cc: "Cisco"
>Sent: Wednesday, June 27, 2001 11:47 AM
>Subject: Re: Spanning on 2900XL switch [7:10107]
>
>
> > On 0, Circusnuts wrote:
> > > I remember there being some differences between the 12.0 Enterprise
>2900
>&
> > > the 11.x's (I know the password break is different), but I think the
>command
> > > is still the same #Port Monitor
> > >
> > > The IOS term is used on the "IOS" based switches (1900/2900/3500) &
>the
>OS
> > > term is used on the "Set" based switches
>(2901/2980/5000/5500/6500/8500).
> > >
> >
> > I have "set" and "port" from the in the "enable" and "conf t" modes. It
>looks
> > like these commands don't exist in these modes.
> >
> > The PDF pages at Cisco are confusing too.
> > --
> >
> > Subba Rao
> > [EMAIL PROTECTED]
> > http://members.home.net/subba9/
> >
> > GPG public key ID 27FC9217
> > Key fingerprint = 2B4C 498E 1860 5A2B 6570 5852 7527 882A 27FC 9217
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=10127&t=10107
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
