Paul,
1. What is your serial interface doing? It is UP/UP,
UP/DOWN, DOWN/DOWN? Do a show interface to check this.
2. How do you have your map statement configured?
Example:
frame-relay map ip 10.10.10.1 300
The 10.10.10.1 is the remote end of the link's IP.
The 300 is the dlci to use.
3. What IP do you have assigned to the serial
interface itself?
Thanks
Debbie
--- Paul Marque wrote:
> Hello world
>
> I am trying to get a frame-relay connection up and
> running.
> I was given an IP and a subnet by my SP
> (213.13.134.136 255.255.255.252).
> However the mask given is "useless" (router tells
> me: bad mask)
> Ok, I gave it a "lower" mask ( something tells me
> this is obviously not
> going to work).I can see my frame-relay map, I get
> the correct lmi (using
> debug commands), everything seems in order (except
> that mask).
> Problem : I cannot ping my SP4s directly connected
> router.
> (is because of the incorrect mask?, or is there
> something else faulty?)
>
>
>
>
_________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at
> http://www.hotmail.com.
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11548&t=11499
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
