Paul,
Just ran across your post, thought I may add .2. I believe your IP address
is a broadcast with that subnet mask however the .252 is common among ISP
for host/security purposes. My suggestion is talk to ISP regarding correct
IP and no ip classless commands
Bill
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Paul Marque
Sent: Monday, July 09, 2001 11:51 AM
To: [EMAIL PROTECTED]
Subject: Help with frame-relay [7:11499]
Hello world
I am trying to get a frame-relay connection up and running.
I was given an IP and a subnet by my SP (213.13.134.136 255.255.255.252).
However the mask given is "useless" (router tells me: bad mask)
Ok, I gave it a "lower" mask ( something tells me this is obviously not
going to work).I can see my frame-relay map, I get the correct lmi (using
debug commands), everything seems in order (except that mask).
Problem : I cannot ping my SP4s directly connected router.
(is because of the incorrect mask?, or is there something else faulty?)
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11644&t=11499
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
