Try 1 60-15 DTE and one 60-15 DCE cable. You should be able to plug the 2
15-pin ends together.
""chica"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
> i'm located in Germany and i'm trying to connect 3-4
> routers back-to-back to simulate a WAN connection in a
> lab.Over here in Germany we use the cable specs of
> X.21
> which is a 60-15 pin cable.The 60 pin end will fit in
> one WIC 1T wan interface card,but the other end cannot
> fit into the other router's WIC 1T interface,it only
> fits in the AUI port.I want a situation where i would
> connect router A's s0 to router B's s0, and not a
> connection from s0 to AUI.Is there a way of getting
> around this?I have searched the cisco' website,but
> still can't figure it out.While configuring one router
> as DCE and the other as DTE what should i watch out
> for,or what command would do this.
> I'ld appreciate it if anyone could come out with a
> solution.
> Thank you.
> >chika
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11603&t=11602
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
