@ the plant in China maybe :o)> The cheapest price I've ever paid new was
$25 & there is generally enough competition on Ebay to keep them low.
Phil
----- Original Message -----
From: "DNT"
To:
Sent: Tuesday, July 10, 2001 2:41 AM
Subject: Re: back-to-back router connection! [7:11602]
> Where do you get at $15 for 2 DCE/DTE 60pin cables?
>
>
> ""PHIMHONGKONG"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > $60 is cheap for 2 cable??
> > u r nut
> > i can get at $15 for 2 cable
> > ""Dennis Laganiere"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Talk to Brad at OptSys, he's got a good price on a short DCE/DTC
cable.
> > > It's much cheaper then buying two 6 foot $65 cables to connect two
> routers
> > > two feet appart on a rack. Send me an e-mail if you have trouble
> finding
> > > Brad, but he's on the list, and by the way, a really good guy. Good
> luck.
> > >
> > > --- Dennis
> > >
> > > -----Original Message-----
> > > From: no mail [mailto:[EMAIL PROTECTED]]
> > > Sent: Monday, July 09, 2001 4:29 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: back-to-back router connection! [7:11602]
> > >
> > >
> > > Try 1 60-15 DTE and one 60-15 DCE cable. You should be able to plug
the
> 2
> > > 15-pin ends together.
> > >
> > > ""chica"" wrote in message
> > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > Hi,
> > > > i'm located in Germany and i'm trying to connect 3-4
> > > > routers back-to-back to simulate a WAN connection in a
> > > > lab.Over here in Germany we use the cable specs of
> > > > X.21
> > > > which is a 60-15 pin cable.The 60 pin end will fit in
> > > > one WIC 1T wan interface card,but the other end cannot
> > > > fit into the other router's WIC 1T interface,it only
> > > > fits in the AUI port.I want a situation where i would
> > > > connect router A's s0 to router B's s0, and not a
> > > > connection from s0 to AUI.Is there a way of getting
> > > > around this?I have searched the cisco' website,but
> > > > still can't figure it out.While configuring one router
> > > > as DCE and the other as DTE what should i watch out
> > > > for,or what command would do this.
> > > > I'ld appreciate it if anyone could come out with a
> > > > solution.
> > > > Thank you.
> > > > >chika
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Get personalized email addresses from Yahoo! Mail
> > > > http://personal.mail.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=11736&t=11602
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
