Hi,
I am facing a weird problem with the redundant MSFC card.
We have three subnets all configured in a single vlan.192.168.1.0,
192.168.2.0 and 192.168.3.0
The MSFC is running OSPF and the 192.168.0.0 network is being advertised.
If both the MSFC's are enabled ( i.e. module 15 and module 16 are enabled)
one subnet (192.168.2.0) uses MSFC1 as the primary module whereas the other
two subnets (192.168.1.0 and 192.168.3.0) use the MSFC2 as the primary subnet.
If I telnet from the 192.168.3.0 subnet to the MSFC IP then the "sh ip
route" command displays only the directly connected routes. If I telnet to
the MSFC IP from the other subnets I can view all the OSPF learnt subnets as
well as the directly connected subnets.
If I make any changes in the MSFC1 configuration, the same does not get
replicated in the MSFC2 configuration and viceversa. The IOS version on the
MSFC is 12.0(3) XE2 and the CatOS version on the sup1A is 5.3(2) CSX
The output of the sh fm features command:
MSFC15#sh fm features
Designated MSFC: 1 Non-designated MSFC:2
Redundancy Status: designated
Any help will be greatly appreciated.
Thanks and Regards ...
Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com
Buy Music, Video, CD-ROM and Audio-Books from http://www.planetmonline.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12360&t=12360
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
