You need at least 12.1(3a)E4 for high availabilty on the MSFC's.
http://www.cisco.com/warp/customer/cc/pd/si/casi/ca6000/tech/hafc6_wp.htm
Jeff
""cisco_fun"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
>
>
> I am facing a weird problem with the redundant MSFC card.
>
>
> We have three subnets all configured in a single vlan.192.168.1.0,
> 192.168.2.0 and 192.168.3.0
>
>
> The MSFC is running OSPF and the 192.168.0.0 network is being advertised.
>
>
> If both the MSFC's are enabled ( i.e. module 15 and module 16 are enabled)
> one subnet (192.168.2.0) uses MSFC1 as the primary module whereas the
other
> two subnets (192.168.1.0 and 192.168.3.0) use the MSFC2 as the primary
subnet.
>
>
> If I telnet from the 192.168.3.0 subnet to the MSFC IP then the "sh ip
> route" command displays only the directly connected routes. If I telnet to
> the MSFC IP from the other subnets I can view all the OSPF learnt subnets
as
> well as the directly connected subnets.
>
>
> If I make any changes in the MSFC1 configuration, the same does not get
> replicated in the MSFC2 configuration and viceversa. The IOS version on
the
> MSFC is 12.0(3) XE2 and the CatOS version on the sup1A is 5.3(2) CSX
>
>
> The output of the sh fm features command:
>
>
> MSFC15#sh fm features
> Designated MSFC: 1 Non-designated MSFC:2
>
>
> Redundancy Status: designated
>
>
> Any help will be greatly appreciated.
>
>
> Thanks and Regards ...
>
> Get Your Private, Free E-mail from Indiatimes at
http://email.indiatimes.com
> Buy Music, Video, CD-ROM and Audio-Books from http://www.planetmonline.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12379&t=12360
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
