I forgot to put in the link to the page on Cisco.com
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc/sc/swgvl
ans.htm
The 35xx's software is the same as the 2900xl, so you can look to the
2900xl's documentation. The section on VTP is about 2 pages down.
-----Original Message-----
From: Hire, Ejay
Sent: Tuesday, July 17, 2001 9:20 AM
To: 'Radford Dion'; [EMAIL PROTECTED]
Subject: RE: VTP config on 3548 [7:12629]
You have to go into VLAN Database mode first. i.e.
config term
VLAN database
vtp client
vtp domain domainname
config term
VLAN database
vtp server
It is important to put in into client mode before joining the domain. If
you don't, Murphy's law says that all of your VLANS on all of your switches
will be erased.
-Ejay
-----Original Message-----
From: Radford Dion [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 17, 2001 8:54 AM
To: [EMAIL PROTECTED]
Subject: VTP config on 3548 [7:12629]
Im trying to configure VTP on a 3548 switch, but when its asking me to
provide a file of vtp configuration details as shown below:
FSFPH0600B(config)#vtp ?
file Configure IFS filesystem file where VTP configuration is stored.
Does anyone know how this works and what is the syntax of the information in
file?
Thanks,
Dion
*****************************************************************
DISCLAIMER: The information contained in this e-mail may be confidential
and is intended solely for the use of the named addressee. Access, copying
or re-use of the e-mail or any information contained therein by any other
person is not authorized. If you are not the intended recipient please
notify us immediately by returning the e-mail to the originator.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12638&t=12629
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
