You have to be at the enable prompt in order to enter vlan database.
Thank you,
MikeN
""Hire, Ejay"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> You have to go into VLAN Database mode first. i.e.
>
> config term
> VLAN database
> vtp client
> vtp domain domainname
>
> config term
> VLAN database
> vtp server
>
>
> It is important to put in into client mode before joining the domain. If
> you don't, Murphy's law says that all of your VLANS on all of your
switches
> will be erased.
>
> -Ejay
>
> -----Original Message-----
> From: Radford Dion [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, July 17, 2001 8:54 AM
> To: [EMAIL PROTECTED]
> Subject: VTP config on 3548 [7:12629]
>
>
> Im trying to configure VTP on a 3548 switch, but when its asking me to
> provide a file of vtp configuration details as shown below:
>
>
> FSFPH0600B(config)#vtp ?
> file Configure IFS filesystem file where VTP configuration is stored.
>
>
> Does anyone know how this works and what is the syntax of the information
in
> file?
>
> Thanks,
>
> Dion
> *****************************************************************
> DISCLAIMER: The information contained in this e-mail may be confidential
> and is intended solely for the use of the named addressee. Access,
copying
> or re-use of the e-mail or any information contained therein by any other
> person is not authorized. If you are not the intended recipient please
> notify us immediately by returning the e-mail to the originator.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12753&t=12629
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
