You don't need a routing protocol to ping a directly connected neighbor ip
address on the same subnet. Inverse arp should of taken care of the layer-2
to layer-3 mapping. As for your own interface add a frame map command for
your own interface and it will work.
Marc Russell
www.ccbootcamp.com
""Ray Smith"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I was doing one of the frame relay labs from Hutnik's CCIE lab books and
did
> not understand the following:-
>
> 1. Why is it that I could only ping from Router-A to Router-B and
> vice-versa, but can not ping their own interfaces?
>
> 2. Why is the routing protocol (RIP in this case) configured on Router-A
but
> not on Router-B, yet I was still able to ping accross end-to-end?
>
> Can someone out there explain this to me? Thanks
>
>
> Ray
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12647&t=12632
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
