And then static map will kill InARP, wouldn't it ?
Sasa
Marc Russell wrote:
>
> You don't need a routing protocol to ping a directly connected neighbor ip
> address on the same subnet. Inverse arp should of taken care of the layer-2
> to layer-3 mapping. As for your own interface add a frame map command for
> your own interface and it will work.
>
> Marc Russell
> www.ccbootcamp.com
>
> ""Ray Smith"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > I was doing one of the frame relay labs from Hutnik's CCIE lab books and
> did
> > not understand the following:-
> >
> > 1. Why is it that I could only ping from Router-A to Router-B and
> > vice-versa, but can not ping their own interfaces?
> >
> > 2. Why is the routing protocol (RIP in this case) configured on Router-A
> but
> > not on Router-B, yet I was still able to ping accross end-to-end?
> >
> > Can someone out there explain this to me? Thanks
> >
> >
> > Ray
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12721&t=12632
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
