Are you saying that normal operation has all 3 leds on and when you go back
there to reboot it, all three leds are off?
Sounds like a hardware problem. If that is not the case, and all three leds
remain on, then you might have memory problems. Either bad memory, or
NAT/PAT is using all available memory and then locking up.
What are your resources like while the machine is working proerly? Have you
monitored the pix throughout the day to see proc. utilization / memory
utilization?
-Patrick
>>> "Magdy H. Ibrahin" 07/17/01 10:56AM >>>
Dear All,
Please help to solve up this problem Which I faced with my PIX 506.
from three days ago, my PIX 506 hang up and stop response to any process
even from the console interface...
I found the three leds "Power, ACT, Network" switched off.
When I turn its power off and on it works fine for few hours...
and each time It needs to switching off/on the power key.
I do know how to investegate this problem or what is the cause of it...
Is there any guy of you can help me in this...
Any reply will be appreciated...
Thanx
Magdy H. Ibrahim
CCNA, MCSE
Purenet Internetworking
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12655&t=12653
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
