Sounds almsot like it's overheating & shutting off. Is the fan running in
it? If you know anything about SNMP you could use software to browse the
MIBs to check status. Keep in mind I never tried that. All I use SNMP for
is bandwidth in/out and cpu utilization.
Allen
----- Original Message -----
From: "Magdy H. Ibrahin"
To:
Sent: Tuesday, July 17, 2001 9:56 AM
Subject: PIX 506 Hang up!!! [7:12653]
> Dear All,
>
> Please help to solve up this problem Which I faced with my PIX 506.
> from three days ago, my PIX 506 hang up and stop response to any process
> even from the console interface...
> I found the three leds "Power, ACT, Network" switched off.
> When I turn its power off and on it works fine for few hours...
> and each time It needs to switching off/on the power key.
> I do know how to investegate this problem or what is the cause of it...
> Is there any guy of you can help me in this...
>
> Any reply will be appreciated...
>
> Thanx
>
> Magdy H. Ibrahim
> CCNA, MCSE
> Purenet Internetworking
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12664&t=12653
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
