Thanks for the response.. I know the router is able to run at 10mbs.. I'm
wondering about the Cat5 running at 10mbs.. I thought I remember reading
that trunking is only possible at 100mbs.. I'm thinking that since the Cat
is only at 10mbs, it would make it impossible for me to run trunking..
Thanks,
Mike Munoz
-----Original Message-----
From: Ayers, Michael [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 1:24 PM
To: 'Munoz, Michael'; [EMAIL PROTECTED]
Subject: RE: Question on Cat5k [7:12836]
The router should be able to run 10Mbs. The Switching technology doesn't
care about the port speed
-----Original Message-----
From: Munoz, Michael [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 10:29 AM
To: [EMAIL PROTECTED]
Subject: Question on Cat5k [7:12836]
I am looking to purchase a Catalyst switch for my department to play with.
I have found the deal from Optsys with Cat5k Sup1 and WS-X5010 Blade but am
wondering about the capabilities of the switch.. Apparently the WS-X5010 is
24pt 10MBS as mentioned to me by Brad.. Assuming that I have a router with
FastEthernet capabilities to run ISL, would the switch be able to handle
this since the blade is not able to run 100mbs?
I just want to make a good purchase for our lab.. At this time, we do not
have any catalyst equipment.
Thanks all for your help!
Mike Munoz
Privileged/Confidential Information may be contained in this message or
attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
conclusions and other information in this message that do not relate to the
official business of this company shall be understood as neither given nor
endorsed by it.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12842&t=12836
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
